Secondary Heating System Cleaner and Scale Remover

Major Industrial Cleaning Applications

1. Heat Exchanger Cleaning Chemical

Heat exchangers can accumulate:

• Mineral scale

• Rust and iron oxide

• Sludge

• Oil and grease

• Process deposits

• Carbonaceous contamination

• Water-side deposits

RXSOL provides different cleaning chemicals depending on the type of deposit, equipment metallurgy and cleaning method.

For example, RXSOL lists Heat Exchanger Cleaner RXSOL-16-1681-025, along with dedicated heat-exchanger products such as Heat Exchanger Cleaner Caus and Heat Exchanger PhosClean. (Rxchemicals)

For rust and corrosion deposits, RXSOL also offers a rust-removal product intended for suitable evaporators, heat exchangers and boilers. (RxMarine)

2. Thermic Fluid System Cleaning Chemical

Thermic-fluid heating systems may develop deposits resulting from:

• Thermal degradation

• Oxidation

• Carbonaceous deposits

• Sludge

• Oil contamination

• Circulation problems

RXSOL cleaning chemistry can be selected according to the thermic-fluid type, deposit condition and system construction.

Before chemical cleaning, the existing thermic fluid should be identified and the system evaluated for compatibility.

3. Steam Boiler Coil Cleaning Chemical

Steam boilers and heating coils can develop scale, rust, sludge and corrosion deposits, particularly when water treatment and operating conditions allow deposits to accumulate.

RXSOL offers products for boiler maintenance and scale/corrosion control, including Corrosion Scale Treatment Boiler – RXSOL-42-4029-025, sludge-conditioning products and specialized scale-removal chemistry. (Rx Solutions)

The correct chemical should be selected based on whether the contamination is primarily:

• Calcium scale

• Silica/silicate scale

• Iron oxide/rust

• Oil contamination

• Sludge

• Mixed deposits

4. MS Tank Cleaning Chemical

Mild-steel tanks may require chemical cleaning before:

• Inspection

• Maintenance

• Repainting

• Product changeover

• Commissioning

• Repair

• Storage of a new product

RXSOL cleaning products can be selected for oil, grease, hydrocarbon, rust, scale and general industrial contamination.

For tank cleaning, the chemical selection should always consider the previous cargo or stored material.

5. MS Pipeline Cleaning Chemical

RXSOL chemicals can be used in suitable pipeline-cleaning programs for removing:

• Rust

• Scale

• Oil

• Grease

• Sludge

• Process deposits

• Hydrocarbon residues

Pipeline cleaning can be carried out by suitable circulation, soaking, flushing or recirculation methods, depending on the pipe diameter, deposit and available equipment.

RXSOL Chemical Selection by Deposit

RXSOL's product range includes a silica-scale remover specifically described for heat exchangers, condensers and boiler tubes. (Rx Solutions)

Chemical Cleaning Method

A typical industrial cleaning program may include:

Inspection → Deposit identification → Pre-flushing → Chemical circulation/soaking → Monitoring → Drainage → Water rinsing → Inspection → Neutralization/passivation where applicable

The exact concentration, temperature and contact time should not be selected from a generic internet recommendation. They should be established from the applicable RXSOL TDS/SDS and the equipment manufacturer's requirements.

For example, certain RXSOL tank/heat-exchanger cleaning procedures use recirculation with controlled temperature and subsequent thorough water rinsing. (Scale Remover)

Why Deposit Identification Is Important

There is no single cleaning chemical that is automatically suitable for every industrial deposit.

For example:

Calcium carbonate scale ≠ silica scale ≠ rust ≠ oil sludge ≠ carbon deposit.

Using the wrong chemical can result in poor cleaning or unnecessary risk to:

• Mild steel

• Stainless steel

• Copper

• Brass

• Aluminum

• Rubber seals

• Gaskets

• Coatings

• Linings

Therefore, RXSOL recommends selecting the cleaning chemical according to the deposit and metallurgy.

RXSOL Chemical Supplier in Panvel & Navi Mumbai

RXSOL chemical products are available for industrial customers in the Panvel, Taloja, Kalamboli, Kamothe, Navi Mumbai and surrounding industrial areas.

RX CHEMICAL RXSOL RX MARINE is listed in the MIDC Pawane/TTC Industrial Area of Navi Mumbai, while other chemical businesses are located across the Panvel–Taloja industrial belt.

Industries Served

RXSOL cleaning chemicals can be considered for:

• Chemical plants

• Pharmaceutical industries

• Process industries

• Manufacturing units

• Boilers and steam systems

• HVAC and cooling systems

• Heat-exchanger maintenance

• Oil and gas facilities

• Marine industries

• Engineering workshops

• Storage terminals

• Tank farms

• Industrial utilities

Frequently Asked Questions

What chemical is used for heat exchanger cleaning?

The appropriate chemical depends on the deposit. RXSOL has dedicated heat-exchanger cleaners and separate chemistry for rust, mineral scale, silica scale and oily contamination. (Rx Solutions)

Which chemical is suitable for boiler coil cleaning?

The selection depends on whether the boiler coil contains mineral scale, silica, rust, sludge or another deposit. RXSOL offers dedicated boiler and scale-treatment products. (Rx Solutions)

Can RXSOL chemicals clean mild-steel tanks?

Suitable RXSOL tank-cleaning and rust/scale-removal products can be selected for MS tanks depending on the contamination and condition of the tank.

Can RXSOL chemicals clean industrial pipelines?

Yes, suitable RXSOL cleaning chemistry can be selected for pipeline descaling, rust removal, degreasing or sludge removal depending on the deposit and pipe material.

Do you supply chemicals in Panvel?

RXSOL chemicals can be supplied to industrial customers in Panvel, Taloja, Kalamboli, Kamothe and Navi Mumbai, subject to product availability and packaging.

RXSOL Brand Chemical Supplier

For heat exchanger cleaning, thermic fluid system cleaning, steam boiler coil cleaning, MS tank cleaning and industrial pipeline cleaning, share the following information with the chemical enquiry:

Equipment: Heat exchanger / boiler / thermic-fluid system / tank / pipeline
Material: MS / SS / copper / aluminum / other
Deposit: Scale / rust / oil / sludge / carbon / mixed
Equipment capacity: ___
Cleaning method: Circulation / soaking / spray / CIP
Temperature: ___
Previous chemical/product: ___